Specifications of M12 Vent Plug - Wuxi Sinceriend New Material Technology Co., Ltd.

Specifications of M12 Vent Plug

2025-02-19

Leave a message

The specifications of M12 Vent Plug are as follows:
Thread specification: M12×1.5 or M12×1.0 are common.
Protection level: Generally, it can reach IP67 and IP68. Some high-performance products can reach IP69K, which can effectively prevent dust, water and oil.
Breathing performance: The air permeability is usually ≥1000ml/min@70mbar, which can quickly balance the pressure inside and outside the equipment. The specific value varies from product to product.
Material: The main body often uses engineering plastics such as PA66+GF, which has good mechanical strength and chemical stability; the breathable membrane is generally made of e-ptfe, which is hydrophobic and oleophobic and has good breathability.
Temperature range: The working temperature is generally -40℃～+150℃, and the storage temperature range may be wider.
Size: The overall diameter is 12mm, and the length varies depending on the specific product design, generally around 10mm-20mm.